If your Wii remotes are having difficulty connecting, there are various things you can try. First and foremost, ensure the batteries are fresh and connected correctly.
Now take the remote and remove its battery cover to locate its red SYNC button (or use a tool in the hole at the back to push it). When the lights start blinking, sync will occur automatically.
Table of Contents
Check the batteries
If your Wii remotes are mis-syncing improperly, it may be time for new batteries. Rechargeable AA cells typically last 12-18 months with normal use so make sure yours are up-to-date before proceeding to step 2.
First, ensure both console and remote are powered on before finding and pressing the red sync button on the console’s front edge, just below its power indicator. Press this button until a message appears indicating successful pairing of Wii remote with system; four blue lights should start flashing to show you are connected; eventually all lights will stop flashing but one light will remain illuminated as an indication of which player you are currently playing as.
If you have multiple remotes, repeat this process until they all become paired with your console. For added flexibility, try performing one-time mode synchronization on your computer using Dolphin Emulator software; just be aware that prior to trying this connection method you need a USB Bluetooth adapter and close its program before making attempts at connection.
At times, a remote’s power button connection to its motherboard may become dirty and stop functioning correctly, in which case you should refer to the Power Button Replacement Guide to clean it off. If that fails to do the trick then misalignment between battery and power button could also cause issues; to ensure maximum effectiveness purchase a new remote from a local store instead.
When pairing your remote with your system, you will require the device address from your console’s Bluetooth settings. As this address will likely contain hexadecimal numbers that need to be converted to ASCII text first using either an online converter or by copying and pasting into the field in Bluetooth settings, once you have this device address enter it into the sync button of your Wii remote to connect. Now enjoy accessing your games from console as well as multiplayer play without being tied down!
Check the remote
If your Wii remotes are mis-syncing, there are a few steps you can take. First, ensure your remotes have fresh batteries. You can usually tell if their battery levels have run low by looking at their LED lights; if none are blinking then it may be time for new batteries. Furthermore, be certain no programs are running while trying to sync them – running programs during sync attempts could prevent your Wii from recognizing the remotes as properly as planned.
Resetting your console may help clear away old settings and allow your remotes to re-pair with it, something which can be done by pressing the Wii’s Sync button. If the problem still persists, however, it could be hardware related and you should contact Nintendo customer support for further advice.
The Wii’s Sync button can be found at the back of its console under its SD card slot cover and features a small red button labeled “Sync.” To use, press and hold this button until the Player LED stops flashing; once paired, this light will remain lit to indicate which controller you are currently using.
During the syncing process, the Wii Remote will temporarily disable its own button input reports to avoid sending duplicate data to the console while continuing to send input reports for its paired host – this is why closing Dolphin before trying to pair with new remotes is highly recommended.
Failure to synchronize can also occur when the sensor bar isn’t visible to or connected to the TV screen, and cannot respond to motion commands. To fix this, connect its wire to another port on the back of your console or simply place it above or below your TV screen – depending on which scenario applies.
If you are having difficulty with getting your Wii remotes to sync up with the system, there are various solutions you can try. One method involves remapping buttons in Linux using wminput and cwiid; this approach should be suitable for novice Linux users who don’t wish to delve too deeply. As an alternative approach, MoltenGamepad offers more advanced remapping software which caters specifically to gamepads.
Check the console
Having trouble getting your Wii remotes to pair? Your console could be to blame; new remotes cannot pair while games or programs are running in the background, so make sure nothing is running and then try pairing again. If this still doesn’t work, however, then there may be something more serious happening such as hardware issues with its Bluetooth stack or something similar.
To pair a Wii U controller with your console, first remove its battery cover and press and hold the red Sync button on its back – this will reset it back to its factory default settings and disconnect any previously-paired devices. Next press and hold the red Sync button for 20 seconds or until all Player LED lights stop blinking; one blue light should stay lit on your remote device to indicate which player is connected.
As well as these steps, there are other solutions you can try when your Wii Remote won’t sync. A common troubleshooting step is restarting your console before trying again; if that doesn’t help then perhaps another method should be applied – try looking up alternative troubleshooting methods or returning back here to this article for additional tips!
Another solution that may work is replacing the batteries in your remote with new ones, though if your old or dying ones require replacement you might need to find replacement batteries in your local tech store or online. You may even try switching them around before buying new ones online!
Connect your Wii remotes using a USB Bluetooth adapter, available from most tech stores for under $20. When you get it set up, simply follow these steps to pair your remotes to Dolphin emulator – then get playing!
Check the software
Wii remotes are calibrated before leaving the factory, but they may stop working for any number of reasons. Some can be repaired while others require purchasing a replacement remote – both are inexpensive and readily available from game stores. A common reason that Wii Remotes don’t sync is when their batteries become degraded or dead; to resolve this problem simply remove and replace batteries before resynching the remote.
Another common Wii Sensor Bar issue is malfunction, often due to objects or lighting interfering with its signals. Candles, remote controls (TV, cable box), wireless computer equipment and heaters may all block these signals and cause problems for the sensors; should this occur, simply move these away from your Wii system immediately.
Resetting sensors by slapping the button side of your remote against your palm may help reset its sensors, and sometimes solves synching issues. If that does not work, try using it on another console to see if that does the trick.
If your Wii remote keeps blinking when syncing, it is probably time for replacement. Batteries could be defective or have lost power; and its sensor bar could have become damaged over time from frequent drops or being exposed to strong sunlight.
If the Wii remote won’t connect to its console, there could be an issue with its software that needs resetting. Resetting can be completed easily and takes little time; simply turn it on until the “health and safety” screen appears, press and hold red SYNC button for 15 seconds until all syncing information has been cleared away; once complete you can sync up again the remote and resume playing games! If any further issues occur you can always contact Nintendo customer service to have the console repaired.