When Should I Add Salt to My Pool?

The first thing you need to do is determine the current salt level in your pool. You can do this by using a test strip or by taking a sample of the water to a local pool store and having them test it.

Once you have this information, consult a salt-to-gallons chart to get an idea of how much salt you need to add to your pool. The salt-to-gallons chart is typically found in the owner’s manual for your pool and can also be found on the internet.

If your pool is brand new or has not had a chlorine treatment in a while, you may have to add a large amount of salt to your pool in order to raise the levels to what is considered optimal. The ideal level of salt for a pool is between 2700-3400 ppm (parts per million), with 3200 ppm being the preferred level.

You can calculate how much salt you need to add by calculating the current salt level and then comparing it to the size of your pool in gallons. For example, if your pool has 23,040 gallons of water and the current salt level is 1600 ppm, you’ll need to add 240 ppm of salt in order to raise the level to 3200 ppm.

After adding the salt, be sure to wait at least 18-24 hours for the water to have time to absorb all of it. This will help prevent any potential rashes or irritation to your skin.

It is a good idea to use a brush when you add the salt so that you can make sure it gets mixed into the water evenly. You can also try pouring it over the surface of your pool a bit at a time, so that the salt is distributed evenly throughout the water.

Once you have added all of the salt, it is important to wait at least 20 minutes before you can swim in the pool. This will allow the salt to dissolve and make the water safe for swimming.

This will also give the pump time to process the salt and prevent a buildup of chemicals in the water. Once the salt is completely dissolved, you can then turn on your pool’s pump and chlorine generator.

There are three main types of salt that you can use to treat your pool: mined salt, solar salt and pool-specific salt. While all of them are good for your pool, the best option is to use mined salt.

The reason this is the best choice is because it comes directly from the earth and is 99% pure sodium chloride. You’ll find that it is a lot cheaper than other types of salt, and it’s often less harsh on your skin and hair than the others.

The amount of salt you need to add will vary depending on the current salt levels in your pool, but most pools should be able to handle a few pounds of salt. You can use a pool calculator to figure out how much salt you need, or you can buy a 40-pound bag of pool-specific salt.