What’s the Best Way to Clean a Washing Machine?

An unclean washing machine can become the breeding ground for mold and mildew. To maintain fresh smelling and spotless results, regular maintenance should be conducted to keep it looking pristine and smelling pleasant.

To keep your washing machine in top condition, run it empty on a hot wash using white vinegar to kill germs and eliminate odours while helping prevent rust and scale buildup. This will also help avoid costly repairs in the future.

Clean the exterior

Dirt and debris shed from clothing, sheets and towels must go somewhere, and your washing machine can become an ideal place for it to build up. Leftover detergent residue, hard water deposits and mildew or mold buildup all present themselves at various points around its lid – thus necessitating regular exterior maintenance to remove musty odors while guaranteeing clean laundry every time! With just a bit of elbow grease you can ensure fresh laundry comes out every time!

To effectively clean your washing machine, it’s best to utilize natural cleaners that are safe for kids, pets and the environment. There are many great choices available to you – you could create your own solution using vinegar, baking soda and water, or purchase commercial solutions such as Dettol’s 5 in 1 Washing Machine Cleaner which promises to remove mold growth, eliminate bad odors and eliminate limescale build-up.

Start by filling your machine with hot water (no clothes), adding three cups of vinegar and allowing the mixture to sit for at least half an hour until all traces of vinegar have dissipated completely. Next, run a regular cycle and allow your machine to drain.

While your inside is taking its course, take time to clean out the exterior with a damp cloth. Pay particular attention to dispensers of fabric softener and soap, cracks and crevices in the door frame, rubber gaskets (which may become breeding grounds for mildew and mold), cracks in door frames as well as any cracks between plastic panels that might contain cracks.

If the smell from your dirty washer persists, try running its sanitizing cycle or, if one doesn’t exist, using chlorine bleach as a sanitizing agent – be sure to follow any instructions for use specific to your model of machine.

Once the washer is sparkling clean, allow it to air dry fully before using it again. As a general guideline, aim to clean both interior and exterior every other week – though this schedule could change depending on how often your household uses their washer.

Clean the detergent drawer

Maintaining a clean washing machine is the cornerstone of quality laundry care, so it is vital that you regularly inspect and maintain its condition. Doing so will rid of mould, unpleasant odours and clothing-ruining residues while helping your washer run more efficiently so your clothes come out cleaner. One effective solution for doing this is using laundry cleaner or washing machine cleaning tablets like the Dettol 5 in 1 Washing Machine Cleaner which you simply drop into an empty washer before running through its hot water cycle – something other cleaning tablets simply cannot do!

Cleaning out the inside of a washing machine can get really dirty quickly, and especially the detergent drawer. Soap scum, mildew and mould can accumulate rapidly in this space. To achieve sparkling cleanliness for your detergent drawer, remove it first before wiping down with either cloth or sponge; paying special attention to cracks and crevices where mould may hide; using an old toothbrush may help reach difficult places more effectively; rinse away any remaining mold with warm soapy water before thoroughly drying the drawer afterwards.

Clean both your detergent drawer and washing machine at least once every month (more if necessary). This easy task should only take around 30 minutes and will help to reduce unpleasant odors caused by old soap and fabric softener deposits.

Maintaining the exterior of your washing machine is also of great importance, particularly around its door and any cracks or crevices where dust may collect. A microfiber cloth is an excellent way to achieve this task; its moisture-wicking abilities will leave your appliance looking brand new!

Rubber gaskets in high-efficiency models of your washer may become coated with dirt, hair, scum and mildew over time; to maintain optimal results it should be regularly cleaned using either a clean, damp cloth or spraying a small amount of household vinegar directly onto the gasket before wiping down with another cloth.

Clean the agitator

Once a year, it is advisable to clean your washer agitator. You can do so by filling up your machine with hot water (without clothes) and then using a cleaning solution of vinegar, baking soda and water; vinegar sanitizes while baking soda deodorizes. These ingredients should all be available in your pantry.

Once your agitator has been submerged for at least an hour, use an old toothbrush to scrub it clean. Your washing machine’s agitator can harbour bacteria that lead to rusting; also be mindful to regularly scrub this part to maintain optimal hygiene levels and avoid further build-up of mineral deposits from detergent residue and mineral deposits. To keep this part working at its peak performance level and extend its life.

Cleaning both the tub mast that the agitator sits on and its mounting system should be part of regular maintenance. Many people incorrectly believe that to properly clean an agitator you must disassemble it; however, with modern washers this is no longer necessary; most plastic agitators can be cleaned using an abrasive sponge dipped into cleaning solution for ease.

Alternative cleaning techniques involve creating a spray bottle filled with vinegar, baking soda and water in equal parts – you can make this cleaner using virtually any variety of vinegar available on the market today! Simply combine 1/2 cup of vinegar with 2 tablespoons of baking soda and 1 cup of water in equal parts before filling a spray bottle – you could also include some drops of liquid dish soap for additional grease-cutting abilities if desired – before spraying onto microfiber cloth or toothbrush to start scrubbing surfaces of machine.

Cleaning the inside of your washer regularly is an effective way to keep it smelling pleasant while also helping prevent mold and mildew growth. Be sure to clean any removable parts of the machine like its lint trap or detergent dispenser as this will ensure its optimal functionality.

Once finished, remember to open up the door so moisture can escape freely and air can circulate around it. Additionally, cleaning out your pump filter regularly may reduce clogs that lead to unpleasant odors – also an excellent tip to help manage bacteria levels! Taking your laundry out as soon as it has completed its cycle can further minimize odors and bacteria issues.

Clean the rubber gasket

Maintaining a clean rubber seal on a washer is one of the best ways to combat mold, mildew and grime build-up. Front load washers in particular tend to collect soap deposits, dirt and mold over time – it’s worth spending a bit of extra time cleaning this area regularly for optimal hygiene! Keeping it spotless also benefits front-load washer users as this area can become difficult to access over time without proper care and attention being provided here.

Start by donning rubber gloves to protect your hands and wiping down the gasket with a damp cloth. Next, fill a spray bottle with equal parts water and vinegar; spray this solution over all crevices of your washing machine including its detergent dispensers before giving it a good rinse and drying thoroughly afterwards.

Finally, remove the gasket and use a toothbrush or soft cloth to access any tight spaces and mold and grime hiding places. Be sure to scrub around the door crease, where mold and grime tends to collect. On front load washers, a gentle scrub using laundry soap should do the trick, while for crevices a toothbrush or sponge are excellent tools for getting into hard-to-reach places.

Maintain a regular cleaning regiment is of utmost importance when maintaining a washing machine. Allowing it to become grimy only makes future cleanup harder, and could potentially even damage its rubber seals if left for too long. Once you’ve established a system for keeping it tidy, simply running an antibacterial cycle every couple of months (preferably with no clothes in it!) will kill germs and prevent mold and mildew build-up.

Outside of regular deep cleanings, there are other steps you can take to keep your washing machine looking its best. Running a hot wash with some eucalyptus oil once every month will give it an amazing scent while helping break down soap deposits in the drain. And using a dehumidifier in the room that houses your washer will also keep moisture at bay and ensure its optimal condition.