Top Tips For Coaxial Cable Wiring

When wiring coaxial cable, it’s crucial that you follow certain guidelines. You need to make sure that you don’t damage the cable during installation or when disconnecting it from the electrical source. Using the right tools can help you avoid any potential problems. The following top tips will help you ensure that your wiring goes as smoothly as possible.

First, make sure that the cable is at least six inches away from any electrical cable. This includes computer and television power cables, as well as the wires in your walls. Telephone wiring can also cause interference, so it’s important to install shielded telephone wiring in new homes and remodels. Also, keep in mind that the cables should be installed at an angle. It’s best to use a cable stapler that can drive the staples into the right depth.

When wiring coaxial cable, keep in mind that you should avoid making sharp bends. This can damage the insulation and shield of the cable. You also need to avoid touching the centre conductor as this may cause a stinger, which will affect the quality of the signal. To cut the cable, use a knife or stripping tool. One blade of the tool will cut the jacket without touching the inner conductor, while the other will cut everything except the inner conductor.

Besides keeping the cable at an appropriate distance from electrical lines, it’s best to use conduit to keep it from twisting and kinking. If necessary, secure the cable using a scrap wire. In addition, it’s advisable to avoid sharp bends as they may damage the coaxial cable. A 90-degree adapter can be used in such cases. If possible, make sure that the adapter is rated for high-definition signal.

Lastly, make sure to tighten the connections. If you can, buy coaxial cable that has connectors attached to the ends. When buying it, look for crimp-ring style connectors, which are more secure and prevent the cable from tangling. They can be found at home centers and can be tightened with a 7/16-inch wrench.

Coaxial cable comes in a variety of sizes and connectors. When purchasing, choose a reputable electronics retailer and check the label carefully for the RG numbers. Then roll it out carefully to avoid kinking or twisting when unwrapping. A chart will help you determine the correct cable for your project.

Grounding coaxial cables is a simple process. To ground your cable, you need to run it through a grounding block and connect it to a qualifying grounding point. Unfortunately, many homeowners are not familiar with this system. Without proper grounding, your cable wiring may lead to electrocution and damage to electronics. It can also lead to house fires.