How do I fix a Canon e03 error?

How do I fix a Canon e03 error?

Turn the machine off, then unplug the power cord….Paper Is Jammed inside the Machine

  1. Make sure that the jammed paper is not under the FINE cartridge holder.
  2. Hold the jammed paper with your hands.
  3. Pull the paper slowly not to tear it, then pull the paper out.
  4. Make sure that all the jammed paper is removed.

How do I fix the error code 306 on my Canon printer?

If the printing error 306 is being displayed in a Macintosh operating system, then one can go to the ‘System preference’, then to ‘Printers and fax’. Further, they need to click on the button to remove the printer and then add it once more by leaving the option on default.

Why am I getting a printer error?

Corrupt data in the spool/printing tray might be causing this service to stop. The other most probable reason for the printing error is the connection between your computer and the printer. This can be the printer drivers or the USB port drivers.

Why is my printer showing error?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

What does P2 mean on Canon printer?

Old Canon Microfilm Scanner 400 reader/printer error codes: P0=After removing a paper jam, another sheet of paper is still jammed in the printer. P1=Paper jam. P2=Two sheets of paper are jammed.

How do I fix my Canon TS3122?

Essential Steps to Reset Your Canon TS3122 Printer

  1. Turn your Canon printer on and go to the main menu.
  2. Now, access the directional arrows to go to the setup menu options.
  3. Go to the “DEVICE SETTINGS” and then click on the “OK” button.
  4. Lastly, choose “RESET SETTINGS” option and then OK to begin with the process.

How do I fix the communication error on my Canon printer?

Cause and Solution

  1. About this page.
  2. Check 1: If the Power lamp is off, make sure that the power plug is plugged in, then turn the printer on.
  3. Check 2: Make sure that the printer port is configured appropriately in the printer driver.
  4. Check 3: Make sure that the printer is connected to your computer properly.

How do you reset a canon Pixma mp258?

Press and hold the “STOP/RESET’ button followed by pressing the “POWER” button. So both buttons depressed position. Off the button “STOP/RESET” but don’t lose “POWER” button. In the conditions, the “POWER” button still depressed, press the “STOP/RESET” button as much as 6 times.

What does error code E08 mean on Canon printer?

The error means that the ink counter registered the waste ink absolvedores have mixed so the canon suggests printer with a manufacturer authorized technical assistant. Getting help from the certified and experienced canon tech support team of our company would be a great support to users to get out this trouble.

How do you reset a canon SlideShare printer?

Turn off the printer without pulling the power cords.2. Hold down STOP/RESET button and press Power button.3. Keep holding down Power button and let STOP/RESET button go.4. Then Press STOP/RESET button twice then let BOTH buttons go.5.

Leave a Reply

Your email address will not be published.