How to Make an Ag Doll House Out of Cardboard

To create a two-story dollhouse, you can use two pieces of plywood. Cut the pieces into equal halves, eight feet long by two feet wide. Cut one half of each sheet off the end, leaving the remaining two feet on either side. This way, you can utilize every piece of plywood, creating the right depth and height for each floor. Add the windows and door, and you’ve completed your dollhouse.

Next, cut off the flaps from each box. Use these flaps to build walls and roof. You can also add windows and furniture. You can use them as instant windows and walls. When the cardboard houses are done, the kids can decorate them. You can use paint or markers, and you can even draw right on the cardboard. Make sure to use tape or glue if necessary to strengthen the cardboard pieces.

To create a multi-room dollhouse, you can stack the crates to create cubbies. The cubbies should be at least twenty inches high to fit the doll comfortably. If the cubbies are any shorter, the doll will not fit inside them. To build a two-story dollhouse, you should measure the height and width of the room you want to make.

Now, you can arrange the boxes into various configurations and styles. Take into account the size of your doll when planning the design. If your dolls are large, you can make one large dollhouse, or a number of smaller ones. Just be sure to clean the box so the kids will enjoy playing with it. After all, they won’t have any other options for their little house if it is messy.

Once you’ve assembled the various rooms, the next step is to create a functional kitchen. I purchased a $60 cutting board at Target, and added legs from two inch-by-two-inch boards. I also used an old cutting board and some 2-inch-by-two-inch wood pieces. I also found a nice rug on sale at Target, and I picked up a wooden cabinet at a garage sale.