How to Fit an Outside Faucet

How to Fit an Outside Faucet:

If you’ve ever wondered how to fit an outside faucet, you’ve come to the right place. This guide covers the cost, time, and materials involved, as well as a simple check valve installation. Hopefully, this information will save you time and money. Just be sure to read the entire article before you start the project! You may even find this article helpful if you’re considering a DIY project for your home!

Cost of installing an outside tap

The cost of installing an outside tap depends on several factors. The type of tap you choose can affect the cost, as can the location of the tap. London, for example, is usually more expensive than the national average, because the installation requires more pipework and may require floors to be removed. You should also be aware of building regulations, including any local planning authority requirements. Listed below are some of the factors that can affect the cost of installing an outside tap.

If the job involves extensive plumbing, the cost of installing an outdoor tap will increase. The longer it takes to complete, the higher the labor charge will be. As the cost is per tap, you should consider the cost of labor as well as the materials. Choosing the type of tap you want is important if you want to enjoy its full functionality. You can choose from two different types of outdoor taps – bib taps and standard taps.

Installation time

The installation time of an outside tap varies. The most common type is cold taps. They provide water that is cold enough for watering plants, power washing, and other uses. This water supply is the same as that of the kitchen’s cold tap. The length of the pipe needed for installation depends on the size of the tap. To ensure a smooth installation process, make sure you hire a professional plumber. The average installation time is between 30 and 40 minutes.

Outside tap installation costs vary widely. You can expect to pay between PS150 to PS270 for this service. The time is taken for this service largely depends on the location. If your property is in London, the price is generally higher than in other areas. Also, because there’s more pipework to connect the tap to the outside pipework, it may require the removal of floorboards. You should make sure you have enough space for the plumber to work efficiently and safely.

Also Read: How to Lift Bonnet on Fiat 500

Materials needed

To fit an outside tap, the plumber must begin by cutting a hole in the wall, which should be about 400mm in diameter and 300mm in height above the damp-proof course. The hole must be large enough to accommodate a 15mm copper pipe and wide enough for the tap thread. The hole must be 330mm long and a large masonry bit should be used for this job. The hole must be prepared by carefully cutting away loose masonry and marking the location of the tap.

The outside tap assembly consists of a backplate that screws into the wall and a compression joint. The pipe is then clipped to the wall, securing it in place. The tap flange connects to the pipe using a compression joint, a screwdriver with a large enough diameter to reach the hole, and a suitable sealant. The copper pipe is then threaded onto the backplate.

Check valve

Unless your home is brand new, it does not have a check valve installed. To fix this, you can purchase a check valve from your local hardware store or Amazon. This valve can be installed either horizontally or vertically and is made from corrosion-resistant brass. It can be used to prevent back-siphonage and negative water pressure. This valve is recommended for outdoor taps. It also prevents freezing.

Installing a garden hose check valve requires no special skills and only takes about five minutes. Before you start fitting the valve, make sure the water supply to the outside tap is turned off. You can use a specially designed long-handled spanner for this purpose. Then, you can drill a hole in the external wall. Be sure to dry the area completely. Make sure the valve is water-tight and that it does not crack.

Planning permission

If you are planning on installing an outside tap, you should take note of the necessary planning permission. Although fitting a tap outside your property is not normally required, you need to get planning permission to fit it. In most cases, it is not necessary to obtain permission for the installation. However, you should take care to follow all rules and regulations to avoid problems with the building regulations. The first step is to determine the type of outside tap you want.

Before you install your new outdoor tap, make sure you have enough pipe available to accommodate the new device. You should also ensure that you have adequate drainage underneath. The pipe should be protected by a double check valve installed indoors. In case of an emergency, you can contact a plumber for assistance. The plumber will charge you by the hour and may need up to 70 or 90 minutes to install the tap. If you choose to hire a plumber, make sure you hire one with experience and are familiar with planning rules.

Leave a Reply

Your email address will not be published.