If your Samsung dryer is not heating, you may need to check the fuse that is located in the blower housing. If you find that the fuse is not completely closed, you should replace it. The heating element is responsible for warming the air drum and can be damaged if it is overheating. The most common cause of overheating is a loose wire connection. To check this, turn off the wall switch and examine the screw terminal.
Another cause of Samsung dryers not heating is a faulty heating element. Lint may clog the vent exhaust. This can cause the heating element to burn out. Sometimes, the heating element is blocked by a malfunctioning thermostat. Also, a blown thermal fuse can prevent the dryer from producing heat.
The thermal fuse is also a common reason for a Samsung dryer not heating. It helps prevent overheating by detecting the temperature. If the thermal fuse is not functioning properly, you will have to replace it. Luckily, the thermal fuse is inexpensive and easy to replace.
Resetting your Samsung dryer is another option. It requires about 10 minutes of your time. First, unplug the machine. Then, wait five minutes for the electricity to run off the wires. Secondly, press the Start/Pause button for 15 seconds. If this still does not fix the problem, you should contact Samsung.
Another possible cause of Samsung dryers not heating is a faulty control board. If you notice a blank control panel and all buttons not functioning, it is possible that the controller board is malfunctioning. Furthermore, the motor relay may be stuck in the ON position, preventing the dryer from stopping.
The temperature sensor may be malfunctioning or has become blocked. If this is the case, you can clean the lint screen system and vent system. In addition, you should check the thermostat. If the temperature has risen, you can reset it.
The thermostat in a Samsung dryer is important to the proper operation of the machine. It controls the heat produced by the dryer and coordinates all its functions. Often, a broken thermostat can result in cold air while drying a wash. If you can’t fix the problem yourself, you should consider having it repaired. A new heating element costs about $170 to $280, and lasts for fifteen years.
The igniter is another possible cause of Samsung dryers not heating. If this component is defective, it can cause the entire heating system to malfunction. Checking this component may not be as simple as it sounds, but it doesn’t require any special expertise.
Another common cause of Samsung dryers not heating is a blocked vent or lint buildup. If the dryer isn’t heating up, you might need to replace the heating element. Otherwise, you can call a repair service to have the appliance repaired.