Canon Mg3520 Error Code 5B02 – How to Fix It

If you own a Canon printer and you encounter the error code 5B02, there are several steps you should take to solve this problem. It is important to follow these steps carefully and do not skip or manipulate any steps. First, unplug the printer from the power outlet. Then, remove all wired connections from the printer. Press the Resume button twice. After a few moments, the printer should automatically reboot.

If you are unable to fix the error code yourself, you may have to contact your printer’s manufacturer for assistance. In most cases, this error code occurs because of a faulty cartridge. A bad cartridge can block the printheads and prevent the printer from functioning. A faulty cartridge should be replaced, but if this doesn’t work, you may need to bring your Canon Mg3520 to a Canon dealer for service.

If none of these methods work, you may need to replace the ink absorber. To do this, unplug the power cord and open the cartridge access door. Press the power button for five seconds, and the printer should reboot itself. If the error still persists, you may need to retire the device.

The next step is to follow the manufacturer’s instructions for replacing the cartridge. If the ink tank is full, the message “Ink absorber full” will appear on the screen. Once this message appears, the printer will not print. In this case, you will need to replace the ink absorber. Otherwise, you can use the instructions found on the power button to contact a service center.

If none of the above steps have worked, you can try resetting your Canon printer. This is an easy, quick, and simple way to solve the problem. To reset your Canon printer, turn it off and on again. This will reset the error code in the machine and allow it to function again.

In some cases, your Canon M3520 printer may show the error code 5B02 because it has run out of ink. This can result in poor quality prints. To fix the problem, try replacing the ink cartridge with a compatible or refillable one. After replacing the ink cartridge, you should be able to print again.

Once you’ve done that, the Canon printer should display the message “Printer in error state.” To begin troubleshooting, check the printer’s settings and then restart it. Make sure the ink cartridge is full, the top cover is closed, and there’s no paper jam.